Ariete ARISIL Bag 10945 is the special lubricant for Ariete ARI fork oil seals.
ARISIL special oil seal lubricant.
ARI fork oil seals are made from a rubber compound specifically developed to work with the lubricants used in front forks, with all their various additives.
This compound is completely different from that normally used for rotating shaft seals, since the physical environment inside a fork with its reciprocating movement, and the specialist lubricants, are completely different.
We have designed ARI fork oil seals with a variety of lip profiles to make them longer lasting, while reducing to a minimum the friction effect against the moving shaft.
Over the years, we have discovered the key role of a separating lubricant between the fork tube and the rubber of the oil seal to reduce to a minimum the surface friction, without affecting the function of the oil seal.
After exhaustive testing, we have chosen a lubricant which is produced in the USA, and devised specifically as a rubber/metal lubricant for mechanical components used in the NASA space program.
The advantage of this special grease, which we call ARISIL, is that it extends the life of the oil seal, and helps it retain its vital characteristics of flexibility and chemical resistance.
For this reason, every set of ARI FORK OIL SEALS contains a single dose sachet of ARISIL (cod. 10945), sufficient to lubricate the two oil seals supplied.
| Sustainability | Sandro Mentasti Environmental Protection Program since 2007 |
|---|---|
| Certifications | Quality Management system according to ISO 9001:2015 and Occupational Safety Management according to ISO 45001:2018 |
| Product type | Grease |
| Colour | White |
| Composition | Silicone Lubricant with additives |
| Temperature range | -65° degrees C => + 175° degrees C |
| Coefficient of friction | 0.003 – load 6.3 n at 10 mm per second 24h |
| USA military specification | G-4343 C |
Ariete, ARI and Harri’s products, while being of very high quality, may be subject to damage in case of impact or accident. Before using Ariete, Ari or Harri’s products, please carefully read the instructions for use and installation. Sandro Mentasti Srl makes every effort to ensure that the information contained in this catalogue is correct and easy to understand, with some information specific to individual products, but accepts no responsibility for any misinterpretation. If you should require any further information, regarding assembly and/or conditions for use, please contact Sandro Mentasti Srl by e-mail at [email protected]. In any event, Sandro Mentasti Srl is not liable for any damage to property and/or persons caused during the use of its products, and neither for any damage resulting from incorrect use and/or use other than that for which the product was originally intended, and damage resulting from assembly errors and/or incorrect installation. Sandro Mentasti Srl manufactures its products directly, and markets them with the ARIETE, ARI and HARRI’S brands. The use contained within the catalogues of any original product codes bearing brands other than those mentioned above is intended as merely descriptive, as well as the possible use of trademarks and / or names of other manufacturers (for example, PIAGGIO®, HONDA®, YAMAHA®, SUZUKI®, KAWASAKI®, BMW®, VESPA®, KYMCO®) which Sandro Mentasti Srl is in no way connected. The only purpose of this use is to describe the accessory and/or the part.
